Dell Latitude E6410 Service Manual Download Page 48

Page: 48 / 52

Back to Removing and Replacing Parts

System Board

Dell™ Latitude™ E6410/E6410 ATG Service Manual

Removing the System Board

Follow the procedures in

Before Working Inside Your Computer

Remove the

ATG port cover

(applicable on E6410 ATG computer only).

Remove the

battery

Remove the

SIM card

Remove the

SD card

Remove the

ExpressCard

Remove the

Smart card

Remove the

hinge covers

Remove the

access panel

10.

Remove the

optical drive

11.

Remove the

hard drive

12.

Remove the

LED cover

13.

Remove the

keyboard

14.

Remove the

coin-cell battery

15.

Remove the

memory

16.

Remove the

WWAN card

17.

Remove the

WLAN card

18.

Remove the

Latitude ON™ Flash/CMG module

19.

Remove the

Fingerprint Reader

20.

Remove the

Heat Sink and Processor Fan

21.

Remove the

Display Assembly

22.

Remove the

palm rest

23.

Disconnect the power connector from the system board.

24.

Disconnect the smart card reader and IEEE 1394 cables from system board.

25.

Remove the screws that secure the system board to the computer.

26.

Starting in the back right corner and separate the system board from the I/O board connector.

27.

Lift the back edge of the system board until all the connectors on the left side are separated and slide the system board towards the rear and remove
from the computer.

Replacing the System Board

To replace the system board, perform the above steps in reverse order.

Back to Removing and Replacing Parts

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTE:

You may need to install Adobe

Flash

Player from

Adobe.com

in order to view the illustrations below.

Summary of Contents for Latitude E6410





















































Search results

Summary of Contents for Latitude E6410

Reviews:

Related manuals for Latitude E6410

Brands by name

Popular brands

Dell Latitude E6410, Service Manual

Search results

Summary of Contents for Latitude E6410

Reviews:

Related manuals for Latitude E6410

Brands by name

Popular brands