Dell Latitude E5410 Service Manual Download Page 51

Page: 51 / 81

Back to Contents Page

Modem Daughter Card

Dell™ Latitude™ E5410 Discrete Service Manual

Removing the Modem Daughter Card

Follow the procedures in

Before Working Inside Your Computer

from the computer.

from the computer.

from the computer.

10.

from the computer.

11.

Remove the

heat sink

from the computer.

12.

13.

14.

15.

16.

17.

from the computer.

18.

Remove the

Bluetooth board

from the computer.

19.

Remove the

system board

from the computer.

20.

Remove the modem connector rubber cover if present.

21.

Lift up the modem daughter card and remove.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Summary of Contents for Latitude E5410


















































































Search results

Summary of Contents for Latitude E5410

Reviews:

Related manuals for Latitude E5410

Brands by name

Popular brands

Dell Latitude E5410, Service Manual

Search results

Summary of Contents for Latitude E5410

Reviews:

Related manuals for Latitude E5410

Brands by name

Popular brands