2.
Place the assembly on the system board.
3.
Tighten in consecutive order the four captive screws, labeled "1" through "4," on the thermal-cooling assembly.
4.
Replace the palm rest (see
Palm Rest
).
5.
Replace the keyboard (see
Replacing the Keyboard
).
6.
Replace the hinge cover (see
Hinge Cover
).
7.
Replace the media bay device (see
Media Bay Devices
).
8.
Replace the battery.
Back to Contents Page
NOTICE:
Ensure that all thermal-cooling pads adhere to both the thermal-cooling assembly and to the appropriate chips.
NOTE:
If necessary, ensure that you reconnect the coin-cell battery (see
Coin-Cell Battery
) before you replace the keyboard.
