Dell Latitude C810, System Information

Page: 25 / 304

D e l l ™ L a t i t u d e ™ C 8 1 0 S y s t e m I n f o r m a t i o n
23
Replacing the Main Battery
CAUTION: Using the wrong battery type may present a risk of fire
or explosion. Replace the battery only with the same or equivalent
type purchased from Dell. You can use your computer’s battery in
any Latitude
™
C-Family computer
except
for the Latitude CS or
CS
x
computers. Do not attempt to use the battery in CS or CS
x
,
and do not use a battery from those computers in your computer.
NOTICE: To avoid data loss, do not replace a battery while the computer is
turned on unless the computer is connected to an electrical outlet or a second
battery is installed.
NOTICE:
Only use lithium ion batteries in your computer. The computer does
not support nickel-metal hydride (NiMH) batteries.
Before installing a new battery, check the battery’s charge by pressing the
battery test button. The battery gauge will not light if the battery is
completely drained.
To replace a battery in the battery bay, perform the following steps.
NOTE:
For full instructions, see your User’s Guide .
1
Save your work and close all open files and application programs.
2
If the computer is docked, undock it.
3
If the modular bay contains a battery, go to step 5.
NOTICE: If you choose to replace the battery with the computer in a standby
or hibernate mode, you have up to 2 minutes to complete the battery
replacement. After 2 minutes, the computer shuts down and you will lose any
unsaved data.
4
If the only battery in the computer is in the battery bay and that is the
battery you want to replace, either connect the computer to an
electrical outlet
or
preserve your data in one of these ways.
• Use suspend mode.
• Use hibernate mode.
NOTE: For more information about suspend and hibernate modes, see
your User’s Guide .
2E409bk0.book Page 23 Thursday, July 5, 2001 9:37 AM