Dell Latitude 7380 Owner'S Manual Download Page 65

Page: 65 / 74

Option

Description

Non-Admin Setup
Changes

Allows you to determine whether changes to the setup options are allowed when an Administrator
Password is set. If disabled the setup options are locked by the admin password. The option Allow
wireless switch changes is

disabled

by default.

UEFI Capsule
Firmware
Updates

Allows to control whether this system allows BIOS updates via UEFI capsule update packages.

Default setting:

Enable UEFI Capsule Firmware Updates

is selected.

TPM 2.0 Security

Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:

●

TPM On

(enabled by default)

●

Clear

●

PPI Bypass for Enabled Commands

●

PPI Bypass for Disabled Commands

●

Attestation Enable (selected)

●

Key Storage Enable (selected)

●

Disabled

●

Enabled

(default)

NOTE:

To upgrade or downgrade TPM1.2/2.0, download the TPM wrapper tool (software).

Computrace

Allows you to activate or disable the optional Computrace software The options are:

●

Deactivate

●

Disable

●

Activate

(default)

NOTE:

The Activate and Disable options will permanently activate or disable the feature and no

further changes will be allowed

CPU XD Support

Allows you to enable the Execute Disable mode of the processor.

Enable CPU XD Support (default)

OROM Keyboard
Access

Allows you to set an option to enter the Option ROM Configuration screens using hotkeys during boot.
The options are:

●

Enabled

●

One Time Enable

●

Disabled

Default setting: Enabled

Admin Setup
Lockout

Allows you to prevent users from entering Setup when an Administrator password is set.

Default Setting:

Disabled

Secure Boot screen options

Option

Description

Secure Boot
Enable

This option enables or disables the

Secure Boot

feature.

●

Disabled

●

Enabled

Default setting: Enabled.

Expert Key
Management

Allows you to manipulate the security key databases only if the system is in Custom Mode. The

Enable

Custom Mode

option is disabled by default. The options are:

●

KEK

●

dbx

If you enable the

Custom Mode

, the relevant options for

PK, KEK, db, and dbx

appear. The options are:

System setup

Summary of Contents for Latitude 7380











































































Search results

Summary of Contents for Latitude 7380

Reviews:

Related manuals for Latitude 7380

Brands by name

Popular brands

Dell Latitude 7380, Owner'S Manual

Search results

Summary of Contents for Latitude 7380

Reviews:

Related manuals for Latitude 7380

Brands by name

Popular brands