Dell Latitude 7380, Owner'S Manual

Page: 27 / 74

Installing power connector port
1. Install the power connector port into the slot on the computer.
2. Place the metal bracket on the power connector port.
3. Tighten the M2.0x3.0 screw to secure the power connector port to the computer.
4. Connect the power connector port cable to the connector on the system board.
5. Install the
base cover .
6. Follow the procedure in After working inside your computer .
LED board
Removing LED board
1. Follow the procedure in Before working inside your computer .
2. Disconnect the battery cable from the connector on the system board.
3. To remove the LED board:
a. Disconnect the LED cable from the LED board [1].
CAUTION: Avoid pulling the cable as it would result in breaking the cable connector. Instead, use a scribe
to release the LED cable from its connector.
b. Unroute the LED cable from the routing channel [2].
c. Remove the M2.0 x 2.5 screw that secures the LED board to the computer [3].
d. Lift the LED board from the computer [4].
Disassembly and reassembly 27