5
Remove the
6
Remove the
.
7
Remove the
.
8
Remove the
.
9
Remove the
Steps
1
Peel the two conductive tape that secures the camera in place [1].
2
Using a plastic scribe carefully pry and lift the camera module from the display back cover [2].
3
Disconnect the camera cable from the connector on the camera module [3].
Installing the camera
Steps
1
Connect the camera cable to the connector on the camera module [1].
2
Insert the camera into the slot on the display back cover [2].
3
Affix the two conductive tape above the camera [3].
106
Disassembly and reassembly
Summary of Contents for Latitude 3540
