background image

Dell™ Latitude™ E5510 Discrete Service Manual 

 

 

Notes, Cautions, and Warnings 

If you purchased a Dell™ n Series computer, any references in this document to Microsoft® 

Windows

® 

operating systems are not applicable. 

Information in this document is subject to change without notice. 

© 2010 Dell Inc. All rights reserved.

 

Reproduction of this material in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell

, the 

DELL

 logo, 

Latitude, Wi-Fi Catcher,

 and 

ExpressCharge 

are trademarks of Dell Inc.; 

Intel

Pentium, Celeron, 

a n d

 Core

 are either trademarks or 

registered trademarks of Intel Corporation; 

Bluetooth

 is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license; 

TouchStrip

 is a trademark of Zvetco 

Biometrics, LLC;

 Blu-ray Disc

 is a trademark of the Blu-ray Disc Association; 

Microsoft

Windows, Windows Server, MS-DOS, Aero, Windows Vista

,

 Windows XP, Windows 7 

and the

 

Windows Vista, Windows 7 

and the

 Windows Vista

 start button

 

are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.  

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

June 2010     Rev. A00

 

Working on Your Computer

  

Adding and Replacing Parts

  

Specifications

  

Diagnostics

  

System Setup

 

 

 

 

 

  

 

  

 

NOTE:

 A NOTE indicates important information that helps you make better use of your computer. 

CAUTION: 

A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. 

 

WARNING: 

A WARNING indicates a potential for property damage, personal injury, or death. 

Summary of Contents for Latitude E5510













































































Reviews: