Palmrest assembly
Removing the palmrest assembly
Prerequisites
before working inside your computer
.
2. Remove the
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
.
8. Remove the
.
9. Remove the
.
10. Remove the
11. Remove the
.
12. Remove the
power button with fingerprint reader
.
13. Remove the
NOTE:
The system board can be removed with the heat sink attached.
About this task
The following image indicates the location of the palmrest and provides a visual representation of the removal procedure.
Steps
After performing the preceding steps, you are left with the palmrest assembly.
Next steps
1. Install the
.
NOTE:
The system board can be installed with the heat sink attached.
58
Removing and installing components
