Steps
1. Align and place the power-button board on the chassis.
2. Install the (M2x3) screw to secure the power-button board to the chassis.
3. Connect the power-button board cable to the connector on the system board and close its latch.
Next steps
1. Install the
.
2. Install the
.
3. Install the
.
4. Install the
.
5. Exit the
.
6. Install the
.
after working inside your computer
.
System board
Removing the system board
Prerequisites
before working inside your computer
.
2. Remove the
3. Enter the
.
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
.
8. Remove the
.
9. Remove the
.
50
Removing and installing components
