Installing the I/O board
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the location of I/O board and provides a visual representation of the installation procedure.
1
Align and place the I/O board on the palm-rest and keyboard assembly.
2
Replace the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly.
3
Connect the I/O-board cable to the I/O board and close the latch to secure the cable.
4
Adhere the tape that secures the I/O board to the I/O board.
5
Using the alignment posts, close the display hinges.
6
Replace the two screws (M2.5x3.5) that secure the left display hinge to the I/O board and palm-rest and keyboard assembly.
1
Install the
.
2
Install the
.
3
Install the
.
Removing and installing components
43
