1
Remove the screw (M2.5x3.5) that secures the display-cable bracket to the system board.
2
Lift the display-cable bracket off the system board.
3
Using the pull tab, disconnect the display cable from the system board.
4
Remove the two screws (M2.5x3.5) that secure the left display hinge to the I/O board and palm-rest and keyboard assembly.
5
Remove the screw (M2x4) that secures the right display hinge to the system board.
6
Open the display hinges at an angle of 90 degrees.
7
Remove the palm-rest and keyboard assembly off the display assembly.
Removing and installing components
39
