3
Remove the
.
The following image indicates the location of speakers and provides a visual representation of the removal procedure.
1
Open the latch and disconnect the touchpad cable from the system board.
2
Disconnect the speaker cable from the system board.
3
Peel the tapes that secure the speaker cable to the palm-rest and keyboard assembly.
4
Note the routing of the speaker cable and remove the speaker cable from the routing guides on the palm-rest and keyboard assembly.
NOTE:
Note the position of the rubber grommets before lifting the speakers.
5
Lift the speakers, along with the cable, off the palm-rest and keyboard assembly.
Installing the speakers
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the location of speakers and provides a visual representation of the installation procedure.
28
Removing and installing components
