POST behavior screen options
Option
Description
Adapter Warnings
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters.
Default setting: Enable Adapter Warnings
Numlock Enable
Allows you to enable the Numlock option when the computer boots.
Enable Network. This option is enabled by default.
Fn Lock Options
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their standard
and secondary functions. If you disable this option, you cannot toggle dynamically the primary behavior of these
keys. The available options are:
•
Lock Mode Disable/Standard—enabled by default
•
Lock Mode Enable
Fastboot
Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
•
Minimal—enabled by default
•
Thorough
•
Auto
Extended BIOS
POST Time
Allows you to create an extra preboot delay. The options are:
•
0 seconds—enabled by default.
•
5 seconds
•
10 seconds
Full Screen Log
•
Enable Full Screen Logo—not enabled
Wireless screen options
Option
Description
Wireless Device
Enable
Allows you to enable or disable the internal wireless devices.
•
WLAN — enabled by default
•
Bluetooth
All the options are enabled by default.
Maintenance screen options
Option
Description
Service Tag
Displays the Service Tag of your computer.
Asset Tag
Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
BIOS Downgrade
This controls flashing of the system firmware to previous revisions. Option 'Allow BIOS downgrade' is enabled by
default.
System setup options
57
