Dell INSPIRON SERIES, Setup Manual

Page: 69 / 100

67
Restoring Your Operating System
NOTE: Dell DataSafe Local Backup may
not be available in all regions.
NOTE: If Dell DataSafe Local Backup is
not available on your computer, use Dell
Factory Image Restore (see “Dell Factory
Image Restore” on page 70) to restore
your operating system.
You can use Dell DataSafe Local Backup to
restore your hard drive to the operating state
it was in when you purchased your computer,
while preserving the data files.
Dell DataSafe Local Backup allows you to:
• Backup and restore your computer to an
earlier operating state
• Create system recovery media
Dell DataSafe Local Backup Basic
To restore the Dell factory-installed software
while preserving the data files:
1.
Turn off your computer.
2.
Disconnect all the devices (USB drive,
printer, and so on) connected to the
computer and remove any newly added
internal hardware.
NOTE:
Do not disconnect the AC
adapter.
3.
Turn on your computer.
4.
When the DELL logo appears, press <F8>
several times to access the
Advanced Boot
Options window.
NOTE:
If you wait too long and the
operating system logo appears, continue
to wait until you see the Microsoft
Windows desktop; then, shut down your
computer and try again.
5. Select Repair Your Computer .