Dell Inspiron 7591 Service Manual Download Page 18

Page: 18 / 72

3. Press the memory module down until it clicks into place.

NOTE:

If you do not hear the click, remove the memory module and reinstall it.

1. Connect the

battery cable

2. Install the

base cover

3. Follow the procedure in

After working inside your computer

WLAN card

Removing the WLAN card

1. Follow the procedure in

Before working inside your computer

2. Remove the

base cover

3. Remove the

battery

The figure indicates the location of the WLAN card and provides a visual representation of the removal procedure.

1. Remove the screw (M2x4) that secures the WLAN card bracket to the WLAN card.
2. Remove the WLAN card bracket from the WLAN card.
3. Disconnect the antenna cables from the WLAN card.
4. Slide and remove the WLAN card from the WLAN card slot.

Installing the WLAN card

If you are replacing a component, remove the existing component before performing the installation procedure.

The figure indicates the location of the WLAN card and provides a visual representation of the installation procedure.

Removing and installing components

Summary of Contents for Inspiron 7591









































































Search results

Summary of Contents for Inspiron 7591

Reviews:

Related manuals for Inspiron 7591

Brands by name

Popular brands

Dell Inspiron 7591, Service Manual

Search results

Summary of Contents for Inspiron 7591

Reviews:

Related manuals for Inspiron 7591

Brands by name

Popular brands