Back to Contents Page
Support Bracket
Dell™ Inspiron™ 580s Service Manual
Removing the Support Bracket
Replacing the Support Bracket
Removing the Support Bracket
1.
Follow the procedures in
Before You Begin
.
2.
Remove the computer cover (see
Removing the Computer Cover
).
3.
Remove the screw that secures the card retention bracket to the chassis.
4.
Push the card retention bracket towards the back of the computer.
5.
Note the routing of the cables through the clamp under the support bracket and remove the cables.
6.
Pivot the support bracket up and lift it off the hinge-tab slot.
7.
Set the support bracket aside in a secure location.
Replacing the Support Bracket
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
WARNING:
Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)
removed.
1 screw
2 support bracket
3 hinge tab
4 hinge-tab slot 5 card retention bracket
Summary of Contents for Inspiron 580S
Page 5: ......
