Dell Inspiron 5676 Service Manual Download Page 50

Page: 50 / 120

Removing the power-supply unit

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Topics:

•

Prerequisites

•

Procedure

Prerequisites

Remove the

right-side cover

Procedure

NOTE:

Note the routing of the cables while removing the power-supply unit so that you can replace them correctly.

NOTE:

Remove the cables from the routing guides on the chassis to avoid potential damage to the cables.

NOTE:

Disconnect the power cables from their extensions.

Lay the computer on the left side and remove the two screws (6-32UNCx6.3) that secure the power-supply unit cover to the chassis
(Only for computers shipped with clear door).

Slide the power-supply unit cover towards the front of the chassis and lift it off the chassis (Only for computers shipped with clear
door).

Removing the power-supply unit

Summary of Contents for Inspiron 5676

























































































































Search results

Summary of Contents for Inspiron 5676

Reviews:

Related manuals for Inspiron 5676

Brands by name

Popular brands

Dell Inspiron 5676, Service Manual

Search results

Summary of Contents for Inspiron 5676

Reviews:

Related manuals for Inspiron 5676

Brands by name

Popular brands