Dell Inspiron 5570 Service Manual Download

Page: 134 / 145

Intel Software Guard Extensions

Advanced Battery Charge
Configuration

Enable Advanced Battery Charge Configuration

from the beginning of the day to a specified work
period.

Primary Battery Charge
Configuration

Set the primary battery charge settings with a
preselected custom charge start and stop.
Default: Adaptive.

POST Behavior

Adapter Warnings

Enable adapter warnings.
Default: Enabled.

Fn Lock Options

Enable or disable the Fn lock mode.

Fastboot

Enable to set the speed of the boot process.
Default: Thorough.

Extend BIOS POST Time

Configure additional pre-boot delay.

Full Screen Logo

Enable or disable to display full screen logo.

Sign of Life Indication

Enable or disable to indicate during POST time that
the power button press is acknowledged in a
manner the user can either hear of feel.

Table 9. System setup options—Virtualization Support menu

Virtualization Support

Virtualization

Specify whether a Virtual Machine Monitor (VMM)
can utilize the additional hardware capabilities
provided by Intel Virtualization Technology.

VT for Direct I/O

Specify whether a Virtual Machine Monitor (VMM)
can utilize the additional hardware capabilities
provided by Intel Virtualization Technology for Direct
I/O.

134

Summary of Contents for Inspiron 5570


















































































































































Search results

Summary of Contents for Inspiron 5570

Reviews:

Related manuals for Inspiron 5570

Brands by name

Popular brands

Dell Inspiron 5570, Service Manual

Search results

Summary of Contents for Inspiron 5570

Reviews:

Related manuals for Inspiron 5570

Brands by name

Popular brands