manualshive.com logo in svg

Dell Inspiron 5485, Service Manual

Share
Download
Dell Inspiron 5485 Service Manual Download Page 57

Replacing the power button with fingerprint 

reader

NOTE: 

Before working inside your computer, read the safety information that shipped with your computer and follow 

the steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After 

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/regulatory_compliance

.

NOTE: 

Applicable only for computers that are shipped with fingerprint reader.

Procedure

1. Align the screw holes on the power button with fingerprint reader with the screw holes on the palm-rest and keyboard assembly.
2. Replace the two screws (M2x3) that secure the power button with fingerprint reader to the palm-rest and keyboard assembly.
3. Adhere the fingerprint-reader cable and the fingerprint-reader board to the palm-rest and keyboard assembly.

Post-requisites

1. Replace the 

I/O board

.

2. Replace the 

display assembly

.

3. Replace the 

fan

.

4. Replace the 

base cover

.

33

Replacing the power button with fingerprint reader

57

Summary of Contents for Inspiron 5485













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands