manualshive.com logo in svg

Dell Inspiron 5485, Service Manual

Share
Download
Dell Inspiron 5485 Service Manual Download Page 17

Replacing the base cover

NOTE: 

Before working inside your computer, read the safety information that shipped with your computer and follow 

the steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After 

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/regulatory_compliance

.

Procedure

NOTE: 

Steps 1 and 2 are applicable only if you have disconnected the battery prior to removing other components from 

your computer.

1. Connect the battery cable to the system board.
2. Adhere the tape that secures the battery cable connection to the system board.
3. Adhere the tape that secures the battery cable to the system board.

4. Align the base cover with the palm-rest and keyboard assembly.
5. Snap the base cover into place.

7

Replacing the base cover

17

Summary of Contents for Inspiron 5485













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands