Removing the coin-cell battery
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
CAUTION:
Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is recommended that
you note the BIOS setup program’s settings before removing the coin-cell battery.
Prerequisites
Remove the
Procedure
1. Disconnect the coin-cell battery cable from the system board.
2. Peel the coin-cell battery assembly off the palm-rest and keyboard assembly.
14
28
Removing the coin-cell battery
Summary of Contents for Inspiron 5485
