Dell Inspiron 5482 Service Manual Download Page 78

Page: 78 / 87

General-System Information

Boot List Option

Displays the available boot options.

Advanced Boot Options

Enable Legacy Option ROMs

Enables or disables the Legacy Option ROMs.

UEFI Boot Path Security

Enables or disables the user to enter Admin password when booting a UEFI boot path
from the F12 Boot Menu.

Date/Time

Displays the current date in MM/DD/YY format and current time in HH:MM:SS
AM/PM format.

Table 4. System setup options—System Configuration menu

System Configuration

SATA Operation

Configure operating mode of the integrated SATA hard drive controller.

Drives

Enables or disables various drives on board.

SMART Reporting

Enables or disables Self-Monitoring, Analysis, and Reporting Technology (SMART)
during system startup.

USB Configuration

Enable Boot Support

Enables or disables booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.

Enable External USB Port

Enables or disables booting from USB mass storage devices connected to external
USB port.

USB PowerShare

Enables or disables the USB PowerShare.

Audio

Enables or disables the integrated audio controller.

Keyboard Illumination

Enables you to choose the mode of the keyboard illumination feature.

Keyboard Backlight Timeout on AC

Enables you to define the timeout value for the keyboard backlight when a power
adaper is plugged.

Keyboard Backlight Timeout on Battery

Enables you to define the timeout value for the keyboard backlight when the
computer is running on battery.

Miscellaneous Devices

Enable or disable various onboard devices.

Enable Camera

Enable or disable the camera.

Table 5. System setup options—Video menu

Video

LCD Brightness

Set the panel brightness independently for Battery and AC power.

Table 6. System setup options—Security menu

Security

Admin Password

Set, change, or delete the administrator password.

System Password

Set, change, or delete the system password.

Internal HDD-0 Password

Set, change, or delete the internal hard-disk drive password.

Strong Password

Enable or disable strong passwords.

Password Configuration

Control the minimum and maximum number of characters allowed for the Admin and
System passwords.

System setup

Summary of Contents for Inspiron 5482
























































































Search results

Summary of Contents for Inspiron 5482

Reviews:

Related manuals for Inspiron 5482

Brands by name

Popular brands

Dell Inspiron 5482, Service Manual

Search results

Summary of Contents for Inspiron 5482

Reviews:

Related manuals for Inspiron 5482

Brands by name

Popular brands