manualshive.com logo in svg

Dell Inspiron 5482, Service Manual, Page: 7 / 87

Share
Download
Dell Inspiron 5482 Service Manual Download Page 7

Identifier

GUID-5D3B1051-9384-409A-8D5B-9B53BD496DE8

Status

Released

Before working inside your computer

NOTE: 

The images in this document may differ from your computer depending on the configuration you ordered.

Identifier

GUID-B2521C24-A407-4ABB-8022-6D88B53F0B94

Status

Released

Before you begin 

1 

Save and close all open files and exit all open applications.

2 

Shut down your computer. Click 

Start 

> 

 Power

 > 

Shut down

.

NOTE: 

If you are using a different operating system, see the documentation of your operating system for shut-down 

instructions.

3 

Disconnect your computer and all attached devices from their electrical outlets.

4 

Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your computer.

5 

Remove any media card and optical disc from your computer, if applicable.

1

Before working inside your computer

7

Summary of Contents for Inspiron 5482
























































































Reviews:

No comments