Dell Inspiron 5481 Service Manual Download

Page: 4 / 96

Chapter 14: Removing the solid-state drive/Intel Optane............................................................ 32

Prerequisites.......................................................................................................................................................................32
Procedure............................................................................................................................................................................32

Chapter 15: Replacing the solid-state drive/Intel Optane............................................................ 34

Chapter 16: Removing the hard drive........................................................................................... 37

Prerequisites....................................................................................................................................................................... 37
Procedure............................................................................................................................................................................ 37

Chapter 17: Replacing the hard drive........................................................................................... 39

Chapter 18: Removing the heat sink............................................................................................. 41

Prerequisites........................................................................................................................................................................41
Procedure.............................................................................................................................................................................41

Chapter 19: Replacing the heat sink.............................................................................................42

Chapter 20: Removing the fan..................................................................................................... 43

Procedure............................................................................................................................................................................43

Chapter 21: Replacing the fan......................................................................................................44

Procedure............................................................................................................................................................................44

Chapter 22: Removing the speakers............................................................................................ 45

Prerequisites.......................................................................................................................................................................45
Procedure............................................................................................................................................................................45

Chapter 23: Replacing the speakers............................................................................................ 46

Chapter 24: Removing the I/O board........................................................................................... 47

Prerequisites....................................................................................................................................................................... 47
Procedure............................................................................................................................................................................ 47

Chapter 25: Replacing the I/O board........................................................................................... 48

Procedure............................................................................................................................................................................48

Contents

Summary of Contents for Inspiron 5481

































































































Search results

Summary of Contents for Inspiron 5481

Reviews:

Related manuals for Inspiron 5481

Brands by name

Popular brands

Dell Inspiron 5481, Service Manual

Search results

Summary of Contents for Inspiron 5481

Reviews:

Related manuals for Inspiron 5481

Brands by name

Popular brands