manualshive.com logo in svg

Dell Inspiron 3670, Service Manual, Page: 40 / 76

Share
Download
Dell Inspiron 3670 Service Manual Download Page 40

Replacing the processor fan and heat-sink 

assembly

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer and follow the 

steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After working inside 

your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

 

Topics:

•

Procedure

•

Post-requisites

Procedure

1 

Place and align the captive screws on the processor fan and heat-sink assembly with the screw holes on the system board.

NOTE: 

As shown in the image, ensure that the processor-fan cable faces the front of the computer before tightening the 

captive screws.

2 

In sequential order (as indicated on the system board), tighten the four captive screws that secure the processor fan and heat-sink 
assembly to the system board.

3 

Connect the processor-fan cable to the system board (FAN CPU).

23

40

Replacing the processor fan and heat-sink assembly

Summary of Contents for Inspiron 3670













































































Reviews:

No comments