manualshive.com logo in svg

Dell Inspiron 3670, Service Manual, Page: 34 / 76

Share
Download
Dell Inspiron 3670 Service Manual Download Page 34

Replacing the optical drive

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer and follow the 

steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After working inside 

your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

 

Topics:

•

Procedure

•

Post-requisites

Procedure

1 

Align and replace the optical-drive bezel to the optical-drive tray.

2 

Slide the optical-drive assembly into its slot on the chassis and align the screw holes on the optical-drive assembly to the screw holes 
on the chassis.

3 

Replace the screws (M2x2) that secures the optical-drive assembly to the chassis.

4 

Connect the optical-drive data cable and power cable to the optical-drive assembly.

19

34

Replacing the optical drive

Summary of Contents for Inspiron 3670













































































Reviews:

No comments