manualshive.com logo in svg

Dell Inspiron 3670, Service Manual, Page: 38 / 76

Share
Download
Dell Inspiron 3670 Service Manual Download Page 38

Removing the processor fan and heat-sink 

assembly

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer and follow the 

steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After working inside 

your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

WARNING: 

The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you 

touch it.

CAUTION: 

For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can 

reduce the heat transfer capability of the thermal grease.

 

Topics:

•

Prerequisites

•

Procedure

Prerequisites

Remove the 

computer cover

.

Procedure

1 

Pry and release the tabs that secure the fan shroud to the processor fan and heat-sink assembly.

2 

Lift the fan shroud off the processor fan and heat-sink assembly.

22

38

Removing the processor fan and heat-sink assembly

Summary of Contents for Inspiron 3670













































































Reviews:

No comments