Replacing the 2.5-inch hard
drives
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
NOTE: When replacing the hard drive, follow the orientation of the hard
drive when it was removed.
1
Align the holes on the hard drive to the tabs on the hard-drive bracket.
2
Snap the hard drive into the hard-drive bracket.
3
Slide the hard-drive assembly into the side-chassis.
4
Connect the data cable and power cable to the hard drive.
5
Close the side-chassis.
Post-requisites
1
Replace the
front bezel
.
2
Replace the
computer cover
.
40