Dell Inspiron 3471 Service Manual Download

Page: 75 / 81

Table 15. System setup options—System Logs menu

System Logs

BIOS Events

Display BIOS events.

Table 16. System setup options—Advanced configurations menu

System Logs

ASPM

Set the Active State Power Management (ASPM) level.

•

Auto

(default)

•

Disabled

•

L1 Only

Table 17. System setup options—SupportAssist System Resolution menu

SupportAssist System Resolution

Auto OS Recovery Threshold

Control the automatic boot flow for SupportAssist System Resolution Console and
for the Dell OS Recovery tool.

•

OFF

•

(default)

•

SupportAssist OS Recovery

Enable or disable the boot flow for the SupportAssist OS Recovery tool when certain
system errors.

By default,

SupportAssist OS Recovery

is selected.

BIOSConnect

Enable or disable the cloud Service OS upon absence of Local OS Recovery..

By default,

BIOSConnect

is selected.

Clearing forgotten passwords

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance

Prerequisites

Remove the

computer cover

Procedure

1. Locate the password jumper (PSWD) on the system board and remove the jumper plug from the password jumper-pins.

NOTE:

For more information on the location of the jumper, see “

System-board components

”.

2. Wait for five seconds.
3. Replace the jumper plug in its original location.

System setup

Summary of Contents for Inspiron 3471


















































































Search results

Summary of Contents for Inspiron 3471

Reviews:

Related manuals for Inspiron 3471

Brands by name

Popular brands

Dell Inspiron 3471, Service Manual

Search results

Summary of Contents for Inspiron 3471

Reviews:

Related manuals for Inspiron 3471

Brands by name

Popular brands