Steps
With the positive-side facing up, insert the coin-cell battery into the battery socket on the system board and snap the battery into place.
Next steps
1. Install the
2. Install the
3. Install the
4. Install the
5. Follow the procedure in
After working inside your computer
.
Heat sink
Removing the heat sink
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
About this task
The following image indicates the location of the heat sink and provides a visual representation of the removal procedure.
24
Removing and installing components
