Dell Inspiron 24-5491, Service Manual

Page: 18 / 72

Steps
1. Align the screw holes on the hard drive with the screw holes on the hard-drive bracket.
2. Replace the four screws (M3x3.5) that secure the hard-drive bracket to the hard drive.
3. Slide the hard-drive assembly into the slot on the display-assembly base.
4. Replace the two screws (M3x5) that secures the hard-drive assembly to the display-assembly base.
Next steps
1. Install the stand .
2. Install the bottom cover .
3. Install the back cover .
4. Follow the procedure in After working inside your computer .
System-board shield
Removing the system-board shield
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the back cover .
3. Remove the bottom cover .
4. Remove the stand .
About this task
The following image indicates the location of the system-board shield and provides a visual representation of the removal procedure.
18 Removing and installing components