Installing the left fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the left fan and provides a visual representation of the installation procedure.
Steps
1. Place the fan on the palm-rest and keyboard assembly.
2. Align the screw holes on the fan with the screw holes on the palm-rest and keyboard assembly.
3. Replace the two screws (M2x4) that secure the fan to the palm-rest and keyboard assembly.
4. Lift the corner of the Mylar that covers the system board.
5. Connect the fan cable to the system board.
Next steps
1. Install the
.
2. Exit
.
After working inside your computer
.
Removing the right fan
Prerequisites
Before working inside your computer
.
2. Enter
.
3. Remove the
.
About this task
The following image(s) indicate the location of the right fan and provides a visual representation of the removal procedure.
Removing and installing components
39
