Dell Inspiron 15 7000 Series Owner'S Manual Download Page 55

Page: 55 / 57

Feature

Specification

Weight

0.58 kg (1.28 lb)

Temperature range:

Operating

0 °C to 40 °C (32 °F to 104 °F)

Non Operating

–40 °C to 70°C (–40 °F to 158 °F)

Table 31. Contactless Smart Card

Feature

Specification

Supported Smart Cards and
Technologies

• ISO14443A — 160 kbps, 212 kbps, 424 kbps, and 848 kbps
• ISO14443B — 160 kbps, 212 kbps, 424 kbps, and 848 kbps
• ISO15693
• HID iClass
• FIPS201
• NXP Desfire

Table 32. Physical Dimension

Physical

Specification

Height:

Touch

• Front: 28.4 mm (1.12 inches)
• Back: 33.7 mm (1.33 inches)

Non-touch

• Front: 27.7 mm (1.09 inches)
• Back: 33.0 mm ( 1.30 inches)

Width

378 mm (14.88 inches)

Depth

261 mm (10.28 inches)

Weight (Minimum)

2.80 kg (6.17 lb)

Table 33. Environmental

Feature

Specification

Temperature range:

Operating

0 °C to 40°C (32 °F to 104°F)

Storage

–40 °C to 65 °C (–40 °F to 149 °F)

Relative humidity (maximum):

Operating

10 % to 90 % (non-condensing)

Storage

5 % to 95 % (non-condensing)

Maximum vibration:

Operating

0.66 GRMS, 2 Hz - 600 Hz

Storage

1.3 GRMS, 2 Hz - 600 Hz

Summary of Contents for Inspiron 15 7000 Series


























































Search results

Summary of Contents for Inspiron 15 7000 Series

Reviews:

Related manuals for Inspiron 15 7000 Series

Brands by name

Popular brands

Dell Inspiron 15 7000 Series, Owner'S Manual

Search results

Summary of Contents for Inspiron 15 7000 Series

Reviews:

Related manuals for Inspiron 15 7000 Series

Brands by name

Popular brands