Dell Inspiron 15-3541, Owner'S Manual

Page: 58 / 97

Replacing the Optical-Drive
Connector Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the optical-drive connector board into the system-board
connector.
2 Replace the screw that secures the optical-drive connector board to the
computer base.
3 Route the antenna cables on the optical-drive connector board and slide
the cables into the slot on the computer base.
4 Close the display and turn the computer over.
5 Route the antenna cables through the routing guide on the computer
base.
6 Connect the antenna cables to the wireless card. See “Replacing the
Wireless Card ”.
Post-requisites
1 Follow the procedure from step 3 to step 9 in “Replacing the Palm Rest ”.
2 Replace the keyboard .
3 Follow the procedure from step 4 to step 5 in “Replacing the Optical
Drive ”.
4 Follow the procedure from step 4 to step 6 in “Replacing the Hard Drive ”.
5 Replace the base cover .
6 Replace the battery .
58