Dell Inspiron 14 Service Manual Download Page 14

Page: 14 / 96

Removing the battery

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in

Before working inside your computer

. After working inside your

computer, follow the instructions in

After working inside your

computer

. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Procedure

Close the display and turn the computer over.

Slide the battery-release latch to the unlock position.

Lift the battery at an angle and remove the battery from the battery bay.

battery

battery-release latch

Turn the computer over and open the display.

Press and hold the power button for 5 seconds to ground the system

board.

Summary of Contents for Inspiron 14

































































































Search results

Summary of Contents for Inspiron 14

Reviews:

Related manuals for Inspiron 14

Brands by name

Popular brands

Dell Inspiron 14, Service Manual

Search results

Summary of Contents for Inspiron 14

Reviews:

Related manuals for Inspiron 14

Brands by name

Popular brands