Dell Inspiron 14 N4120 Service Manual Download Page 25

Page: 25 / 106

Memory

Replace the module cover (see "Replacing the Module Cover" on page 18).

Replace the battery (see "Replacing the Battery" on page 16), or connect

the AC adapter to your computer and an electrical outlet.

CAUTION:

Before turning on the computer, replace all screws and ensure that no

stray screws remain inside the computer. Failure to do so may result in damage to
the computer.

Turn on the computer.

As the computer boots, it detects the memory module(s) and automatically

updates the system configuration information.
To confirm the amount of memory installed in the computer:

Click

Start



Control Panel



System and Security



System

tab

notch

Summary of Contents for Inspiron 14 N4120











































































































Search results

Summary of Contents for Inspiron 14 N4120

Reviews:

Related manuals for Inspiron 14 N4120

Brands by name

Popular brands

Dell Inspiron 14 N4120, Service Manual

Search results

Summary of Contents for Inspiron 14 N4120

Reviews:

Related manuals for Inspiron 14 N4120

Brands by name

Popular brands