Dell Inspiron 13 Service Manual Download Page 97

Page: 97 / 100

Replacing the display cable

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in

Before

working inside your computer

. After working inside your computer, follow

the instructions in

After working inside your computer

. For more safety best

practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.

Procedure

Route the display cable through the routing guides on the display bezel.

Adhere the touch-screen board to the display bezel.

Connect the touch-screen board cables to the touch-screen board.

Adhere the tapes to the touch-screen board cable and the touch-screen board.

Slide the display cable into the connector on the display panel and press down
the latch to secure the cable.

Post-requisites

Replace the

Windows-button board

Follow the procedure from step 1 to step 2 in “Replacing the

camera

”.

Follow the procedure from step 4 to step 5 in “Replacing the

Replace the

Replace the

Replace the

Summary of Contents for Inspiron 13





































































































Search results

Summary of Contents for Inspiron 13

Reviews:

Related manuals for Inspiron 13

Brands by name

Popular brands

Dell Inspiron 13, Service Manual

Search results

Summary of Contents for Inspiron 13

Reviews:

Related manuals for Inspiron 13

Brands by name

Popular brands