Dell Inspiron 13 5000, Service Manual

Page: 99 / 135

Replacing the sensor board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Procedure
1 Align the screw hole on the sensor board to the display panel and snap
the sensor board in place.
2 Slide the sensor-board cable into the slot on sensor board and press
down the latch to secure the cable.
3 Adhere the tape on the sensor-board connector to secure the cable.
4 Replace the screw that secures the sensor board to the display panel.
Post-requisites
1 Follow the procedure from step 4 to step 6 in “ Replacing the display
panel ”.
2 Replace the display assembly .
3 Replace the battery .
4 Replace the base cover .
99