Replacing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
Procedure
1
Slide the display cable into the connector on the display panel and close the latch
to secure the cable.
2
Adhere the adhesive tape to the display cable.
3
Align the screw holes on the display panel with the screw holes on the display
back-cover and antenna assembly.
4
Replace the four screws (M1.2x2) that secure the display panel to the display
back-cover and antenna assembly.
Post-requisites
1
Replace the
2
Replace the
.
3
Replace the
.
4
Replace the
.
5
Follow the procedure from step 2 to step 5 in “
”.
83