Replacing the battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
Procedure
1
Follow the step 4 procedure in “
”.
2
Slide the tab on the battery (applicable for configuration with hard drive only)
under the hard-drive bracket and place the battery on the palm-rest and
keyboard assembly.
3
Align the screw holes on the battery with the screw holes on the palm-rest and
keyboard assembly.
4
Replace the three screws (M2x3) that secure the battery to the palm-rest and
keyboard assembly.
5
Connect the battery cable to the system board.
Post-requisites
Follow the procedure from step 2 to step 5 in “
”.
28
