Dell Inspiron 11 3000 Series, Service Manual

Page: 32 / 110

Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer . After working inside your computer, follow
the instructions in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Procedure
1 Slide the I/O-board cable into the connector on the I/O board and close the
latch to secure the cable.
2 Slide the ports on the I/O board into the slots on the base cover and snap the
I/O board into place.
3 Align the screw hole on the I/O board with the screw hole on the base cover.
4 Replace the screw (M2x3) that secures the I/O board to the base cover.
5 Slide the I/O-board cable into the connector on the system board and close the
latch to secure the cable.
Post-requisites
1 Replace the battery .
2 Follow the procedure from step 2 to step 5 in “ Replacing the base cover ”.
32