Steps
1. Slide the hard drive into the hard-drive cage.
2. Replace the four screws (#6-32) that secure the hard drive to the hard-drive cage.
3. Align the hard-drive assembly with the tabs on the chassis.
4. Using the alignment post, align the screw hole on the hard-drive assembly with the screw hole on the chassis.
5. Route the power cable and data cable through the routing guides on the hard-drive assembly, and connect the cables to the hard
drive.
6. Replace the screw (#6-32) that secures the hard-drive assembly to the chassis.
Next steps
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
Removing and installing components
15
