Dell G5 5000 Service Manual Download Page 57

Page: 57 / 64

Table 9. System setup options—Intel Software Guard Extensions menu (continued)

Intel Software Guard Extensions

Numlock LED

Enables the NumLock function when computer boots.

Keyboard Errors

Enables the keyboard error detection.

Fastboot

Enable to set the speed of the boot process.

Default: Thorough.

Extend BIOS POST Time

Configure additional pre-boot delay.

Full Screen Logo

Enable or disable to display full screen logo.

Warnings and Errors

Sets the boot process to pause when Warnings or Errors are detected.

Table 10. System setup options—Virtualization Support menu

Virtualization Support

Virtualization

Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities provided by Intel Virtualization Technology.

VT for Direct I/O

Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities provided by Intel Virtualization Technology for Direct I/O.

Table 11. System setup options—Wireless menu

Wireless

Wireless Device Enable

Enable or disable internal wireless devices.

Table 12. System setup options—Maintenance menu

Maintenance

Service Tag

Display the system’s Service Tag.

Asset Tag

Create a system Asset Tag.

SERR Messages

Enable or disable SERR messages.

BIOS Downgrade

Control flashing of the system firmware to previous revisions.

Data Wipe

Enable to securely erase data from all internal storage devices.

BIOS Recovery

Enable the user to recover from certain corrupted BIOS conditions from a recovery
file on the user primary hard drive or an external USB key.

First Power On Date

Enable the user to set the Ownership date.

Table 13. System setup options—System Logs menu

System Logs

BIOS Events

Display BIOS events.

Table 14. System setup options—SupportAssist System Resolution menu

SupportAssist System Resolution

Auto OS Recovery Threshold

Control the automatic boot flow for SupportAssist System Resolution Console and
for Dell OS Recovery tool.

SupportAssist OS Recovery

Enable or disable the boot flow for SupportAssist OS Recovery tool in the event of
certain system errors

BIOSConnect

BIOSConnect enable or disable cloud Service OS upon absence of Local OS
Recovery.

System setup

Summary of Contents for G5 5000

































































Search results

Summary of Contents for G5 5000

Reviews:

Related manuals for G5 5000

Brands by name

Popular brands

Dell G5 5000, Service Manual

Search results

Summary of Contents for G5 5000

Reviews:

Related manuals for G5 5000

Brands by name

Popular brands