Dell G3 15 3500 Service Manual Download | Manualshive

Page: 70 / 75

background image

Updating the BIOS in Linux and Ubuntu

To update the system BIOS on a computer that is installed with Linux or Ubuntu, see the knowledge base article

at

www.dell.com/support

Flashing the BIOS from the F12 One-Time boot menu

Update your computer BIOS using the BIOS update.exe file that is copied to a FAT32 USB drive and booting from the F12
One-Time boot menu.

About this task

BIOS Update

You can run the BIOS update file from Windows using a bootable USB drive or you can also update the BIOS from the F12
One-Time boot menu on the computer.

Most of the Dell computers built after 2012 have this capability, and you can confirm by booting your computer to the F12
One-Time Boot Menu to see if BIOS FLASH UPDATE is listed as a boot option for your computer. If the option is listed, then the
BIOS supports this BIOS update option.

NOTE:

Only computers with BIOS Flash Update option in the F12 One-Time boot menu can use this function.

Updating from the One-Time boot menu

To update your BIOS from the F12 One-Time boot menu, you need the following:

●

USB drive formatted to the FAT32 file system (key does not have to be bootable)

●

BIOS executable file that you downloaded from the Dell Support website and copied to the root of the USB drive

●

AC power adapter that is connected to the computer

●

Functional computer battery to flash the BIOS

Perform the following steps to perform the BIOS update flash process from the F12 menu:

CAUTION:

Do not turn off the computer during the BIOS update process. The computer may not boot if you turn

off your computer.

Steps

1. From a turn off state, insert the USB drive where you copied the flash into a USB port of the computer.
2. Turn on the computer and press F12 to access the One-Time Boot Menu, select BIOS Update using the mouse or arrow keys

then press Enter.
The flash BIOS menu is displayed.

3. Click

Flash from file

.

4. Select external USB device.
5. Select the file and double-click the flash target file, and then click

Submit

.

6. Click

Update BIOS

. The computer restarts to flash the BIOS.

7. The computer will restart after the BIOS update is completed.

70

System setup

«
...
68
69
70
71
72
...
»

Summary of Contents for G3 15 3500












































































Reviews:

No comments

Related manuals for G3 15 3500

Aspire 5 A515-56

Brand: Acer Pages: 87

Brand: Acer Pages: 354

Brand: Acer Pages: 274

Brand: Acer Pages: 230

Brand: JVC Pages: 2

Brand: JVC Pages: 185

Brand: JVC Pages: 16

Brand: JVC Pages: 232

VERSA DAYLITE 3-CELL REMOVABLE BATTERY

Brand: NEC Pages: 6

Brand: NEC Pages: 6

Brand: Sony Pages: 2

Brand: Sony Pages: 458

Brand: Prestigio Pages: 36

Brand: Packard Bell Pages: 883

Brand: Trust Pages: 2

Brand: AIRIS Pages: 268

Brand: Gigabyte Pages: 17

ViewBook VS13058

Brand: ViewSonic Pages: 41

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands