Dell G2722HS User Manual Download Page 48

Page: 48 / 58

| Operating the monitor

Yes

G2722HS

Adjusting to this value will increase power consumption above the

default level. Do you want to continue?

Dell 27 Gaming Monitor

If you press any button other than the power button, the following messages will appear
depending on the selected input:

Dell 27 Gaming Monitor

G2722HS

No DP signal from your device.

Press any key on the keyboard or move the mouse or wake it up.

If there is no display, press the monitor button again to select the correct

input source.

If either DisplayPort, HDMI 1 and HDMI 2 input is selected and the corresponding cable is not

connected, a floating dialog box as shown below appears.

G2722HS

The display will go into Standby mode in 4 minutes.

www.dell.com/G2722HS

No DP Cable

Dell 27 Gaming Monitor

G2722HS

The display will go into Standby mode in 4 minutes.

No HDMI 1 Cable

Dell 27 Gaming Monitor

www.dell.com/G2722HS

Summary of Contents for G2722HS



























































Search results

Summary of Contents for G2722HS

Reviews:

Related manuals for G2722HS

Brands by name

Popular brands

Dell G2722HS, User Manual

Search results

Summary of Contents for G2722HS

Reviews:

Related manuals for G2722HS

Brands by name

Popular brands