4. Grasp the storage processor and firmly pull it from the chassis.
5. If the storage processor is being replaced, then the DIMMs must be moved from
the current storage processor to the replacement storage processor as follows:
a. Remove the air duct from the current storage processor and the
replacement storage processor.
b. Remove the DIMMs one at a time from the current storage processor and
install them in the same location on the replacement storage processor.
c. When the last DIMM has been moved, replace the air duct in the
replacement storage processor.
WEEE Disassembly Instructions
12
EU2SPE
WEEE Disassembly Instructions