About this guide
This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting, inserting
modules, and connecting to a power source.
CAUTION:
To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this
equipment.
NOTE:
Only trained and qualified personnel can install this equipment. Read this guide before you install and power up this
equipment. This equipment contains two power cables. Disconnect both power cables before servicing.
NOTE:
This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.
Figure 1. Class 1 laser product tag
NOTE:
When no cable is connected, visible and invisible laser radiation may be emitted from the aperture of the optical
transceiver ports. Avoid exposure to laser radiation, and do not stare into open apertures.
Regulatory
Marketing model Z9432F-ON is represented by the regulatory model E46W and the regulatory type E46W001.
Topics:
•
•
Related documents
For more information about the Z9432F-ON switch, see the following documents:
●
Dell EMC SmartFabric OS10 Release Notes
●
Dell EMC SmartFabric OS10 User Guide
●
Dell EMC PowerSwitch Z9432F-ON Installation Guide
●
Dell EMC PowerSwitch Z9432F-ON Release Notes
●
Dell EMC PowerSwitch Z9432F-ON BMC User Guide
●
Open Networking Hardware Diagnostic Guide
NOTE:
To access product documentation for a specific Dell EMC PowerSwitch, see the
. For all other resources, see Dell EMC support:
.
1
4
About this guide
