Table 1. Z9432F-ON switch LED behavior (continued)
LED
Description
LOCATOR LED/System Beacon
●
Off—Locator function disabled
●
Flashing blue—Locator function enabled
Table 2. System management Ethernet port LED
LED
Description
Link LED
●
Off—No module present
●
Solid green—Port link is up
●
Solid yellow—Module needs attention using the CLI.
●
Flashing yellow, one second on; one second off—Port
beacon
Activity LED
●
Off—No activity
●
Flashing green—Port activity
Table 3. Z9432F-ON QSFP56-DD port LED
LED
Description
Link/Activity LED
●
Off—No link/activity
●
Solid green—Port link is up
●
Flashing green ~30ms—Port activity operating
●
Solid yellow—Use CLI to check LED status
Table 4. SFP+ port LED
LED
Description
Link LED
●
Off—No link
●
Solid green—Link operating at maximum speed, 10G
●
Flashing green—Port activity at maximum speed
●
Solid yellow—Link operating at a lower speed,1G
Activity LED
●
Off—No link
●
Flashing green—port activity
Prerequisites
The following is a list of components that are required for successful switch installation:
NOTE:
For detailed installation instructions, see
and
.
●
Z9432F-ON switch or multiple switches, if stacking
●
AC or DC country- and regional-specific cables to connect the AC or DC power source to each of the switch AC or DC
power supplies
●
Rail mounting brackets for rack installation, included
●
Screws for rack installation, not included
●
#1 and #2 Phillips screw drivers, not included
●
Torx screwdriver, not included
●
Ground cable screws for L-bracket, included
●
Copper/fiber cables
Other optional components are:
●
Ground cable and lug for the frame-end of the ground cable
●
Extra mounting brackets
●
Extra power supply unit
●
Extra fan module
10
The Z9432F-ON switch
