Dell EMC PowerEdge XE7440, Installation And Service Manual

Page: 83 / 137

5. Remove the PCIe dummy bracket .
6. Remove the mini PERC card module .
7. Remove the cooling fans .
8. Remove the motherboard bridge module .
9. Remove the the motherboard interposer board .
10. Remove the sled cables kit .
Steps
1. Using the Phillips #2 screwdriver, remove the three screws that secure the motherboard bridge board (1) to the
motherboard bridge module.
2. Lift the motherboard bridge board (1) out of the motherboard bridge module bracket.
Figure 49. Removing the Motherboard bridge board (1)
Next steps
Install the motherboard bridge board (1) .
Installing the Motherboard bridge board (1)
Prerequisites
Follow the safety guidelines listed in the Safety instructions .
Steps
1. Align and install motherboard bridge board (1) into the motherboard bridge module bracket.
2. Using the Phillips #2 screwdriver, secure the motherboard bridge board (1) to the module bracket with three screws.
Installing and removing system components 83